Hybrid Solar Cum Wind Energy Trainer Manufacturer,Supplier and Exporter in India
.png)
Product Code : SCL-WT-13991
Indian Lab Suppliers supplies the Hybrid Solar Cum Wind Energy Trainer (Product ID: 13991), listed under the Water Treatment subcategory of Water and Sanitation equipment on this site — though this is a renewable-energy education trainer, not water treatment equipment. We note this mis-categorization honestly rather than forcing an inaccurate water-treatment framing.
Source-data note: the manufacturer's own specification for this unit fully details the wind-simulation hardware (motor, alternator, control panel) and the shared grid-tie/battery/inverter system, and repeatedly describes hybrid solar-plus-wind operation and priority selection between wind, solar, battery, and grid sources — but it does not list a dedicated solar PV panel or solar charge controller component alongside the wind hardware. We have presented only what the source specifies and have not invented solar panel specifications to fill this gap; buyers wanting confirmation of the solar-side hardware should check with our team.
Quick Answer
This Hybrid Solar Cum Wind Energy Trainer is an advanced trainer combining a simulated wind generation system, battery storage, a 900VA pure sine wave inverter, and a 1kW MPPT grid-tie inverter, letting students study wind and solar energy sources individually or in tandem with priority selection between wind, solar, battery, and grid supply.
Key Specifications
| Parameter | Detail |
|---|---|
| Product ID | 13991 |
| System control | MPPT-based control for both solar/wind charge controllers and the grid-tie inverter, with priority selection between wind, solar, battery, and grid source usage |
| Power quality | Pure sine wave output from the 900VA inverter, suitable for sensitive appliances |
| Grid management | Option to enable or disable grid charging |
| Protection | Intelligent overload sensing with short-circuit protection and battery deep-discharge protection |
| Wind simulator | 1HP DC shunt motor (200V, 1500 RPM) driving a 3-phase alternator |
| Alternator specifications | 100VA capacity, 12V, 500 RPM |
| DC motor drive control panel | 0–200V variable armature output to simulate varying wind speed, with a 300V DC voltmeter and 5A DC ammeter |
| Battery storage | 12V, 100Ah tubular battery |
| Charging/distribution | 3-phase battery charger with DC energy meter, 12V DC bus bar, and 12V DC distribution bar |
| Load management | Dump load panel (0.5Ω/100W resistive load) plus MCB and ELCB safety switches/breakers |
| Grid-tie inverter capacity | 1kW nominal output power, max DC input power 1.2kW |
| Grid-tie MPPT | 2 MPPT trackers, 40–160V DC tracking range, max MPPT efficiency 99.9% |
| Grid-tie AC output | 220/230/240V AC nominal, THD <2.5%, power factor >99.9%, max efficiency 97.8% |
| Grid-tie safety | DC reverse-polarity and short-circuit protection, anti-islanding, IP65 rated |
| Communication | Wi-Fi interface for monitoring |
Where This Unit Is Used
The Hybrid Solar Cum Wind Energy Trainer is used in electrical and renewable-energy engineering laboratories to teach hybrid renewable energy system design, grid-tie inverter operation, and multi-source power management — it is an energy-education trainer rather than water treatment equipment, and is grouped here only because of how this listing is categorized in our catalog.
Why Buy from Indian Lab Suppliers
Indian Lab Suppliers is an India-based equipment manufacturer and exporter supplying the Hybrid Solar Cum Wind Energy Trainer alongside its broader lab equipment catalog, with documentation such as a Certificate of Origin available on request for institutional and export orders.
Frequently Asked Questions
What experiments can be performed on this trainer?
Studying solar and wind energy control in tandem, studying each system individually, studying the working of the DC motor drive control panel (including the wind simulator), the battery charger controller and both inverters (900VA and grid-tie), the inverter and energy meter with load, and the safety and control panels (lockout/tag-out, stop switch, horizontal/vertical switch panels).
How is wind speed simulated?
A 1HP DC shunt motor (200V, 1500 RPM), controlled through a variable 0–200V armature drive panel, drives a 3-phase alternator (100VA, 12V, 500 RPM) to represent varying wind conditions.
What does the grid-tie inverter offer?
A 1kW nominal output with two MPPT trackers (40–160V DC range, up to 99.9% MPPT efficiency), grid-standard AC output with low THD and high power factor, IP65-rated protection, anti-islanding safety, and Wi-Fi monitoring.
Can the system prioritize different power sources?
Yes, the controller offers a priority selection option between wind, solar, battery, and grid sources, along with the ability to enable or disable grid charging.
Do you supply this equipment for institutional or export orders outside India?
Yes. Indian Lab Suppliers quotes equipment for institutional and tender buyers across export markets — see the Tenders page for documentation requirements.
Related Categories
Sanitation & Hygiene · Water and Sanitation · Water Testing · Pump Riser Pipe · Water Distribution-Fittings
Request a Quote
For pricing, bulk quantities or tender documentation on the Hybrid Solar Cum Wind Energy Trainer, reach our team via Contact Us or submit your requirement through our Tenders page.
.png)
.png)
.png)
.png)
.png)
.png)
.png)