Spray Chamber Trainer System Manufacturer,Supplier and Exporter in India
.png)
Product Code : SCL-WT-13978
Indian Lab Suppliers supplies the Spray Chamber Trainer System (Product ID: 13978), part of the Water Treatment range under Water and Sanitation equipment, used to demonstrate wet scrubbing for dust pollution control.
Quick Answer
The Spray Chamber Trainer System is a lab-scale wet scrubbing (spray chamber) unit with a clear acrylic separation chamber, five interchangeable stainless steel spray nozzles (100–1000 micrometre droplet sizes), and a dedicated water circulation system, letting students study droplet size, liquid-to-gas ratio, and pressure drop effects on separation efficiency.
Key Specifications
| Parameter | Detail |
|---|---|
| Product ID | 13978 |
| Spray chamber (separator) | Clear acrylic, 0.3m diameter x 2m high, with a spray nozzle mount and top mist eliminator |
| Spray nozzles | 5 stainless steel sizes, droplet sizes 100, 200, 300, 500, and 1000 micrometres |
| Air blower | Max air delivery 198 m³/hour at 2800 RPM, speed varied via frequency inverter |
| Dust feeding | Acrylic conical-bottom cylinder with a flow regulating valve |
| Structure | Skid platform with epoxy-coated steel frame and lockable castor wheels; IP55 dust/splash-proof control console |
| Water tank | Stainless steel, 55 litres capacity |
| Water pump | Centrifugal, with low-level cut-off switch protection, max flow rate 25 L/min |
| Water control/measurement | Pressure gauge (0–6 bar), pressure regulator, two liquid flow meters (0–1 L/min and 0–20 L/min) |
| Air flow meter | Venturi type with differential pressure gauge, 0–16 inches of H2O |
| Pressure drop measurement | Panel-mounted Bourdon-type differential pressure gauge, 0–100mm H2O, across the chamber |
Where This Unit Is Used
The Spray Chamber Trainer System is used in environmental and chemical engineering laboratories to teach wet scrubbing principles for dust and pollution control, forming part of a broader range of water treatment equipment such as the Pulsed-Jet Filtration Training System.
Why Buy from Indian Lab Suppliers
Indian Lab Suppliers is an India-based equipment manufacturer and exporter supplying the Spray Chamber Trainer System alongside its broader Water and Sanitation catalog, with documentation such as a Certificate of Origin available on request for institutional and export orders.
Frequently Asked Questions
What experiments does this system support?
Studying the effect of droplet size on separation efficiency, investigating the effect of liquid-to-gas (L/G) ratio on separation efficiency, and verifying the relationship between pressure drop and inlet velocity.
What droplet sizes are available?
Five interchangeable stainless steel nozzles producing droplet sizes of 100, 200, 300, 500, and 1000 micrometres.
How is the liquid-to-gas ratio controlled?
Via a centrifugal pump (max 25 L/min) with two liquid flow meters (0–1 L/min and 0–20 L/min) and a pressure regulator on the water side, paired with a variable-speed air blower.
How is pressure drop measured?
By a panel-mounted Bourdon-type differential pressure gauge across the spray chamber (0–100mm H2O), alongside a Venturi-type air flow meter.
Do you supply this equipment for institutional or export orders outside India?
Yes. Indian Lab Suppliers quotes equipment for institutional and tender buyers across export markets — see the Tenders page for documentation requirements.
Related Categories
Sanitation & Hygiene · Water and Sanitation · Water Testing · Pump Riser Pipe · Water Distribution-Fittings
Request a Quote
For pricing, bulk quantities or tender documentation on the Spray Chamber Trainer System, reach our team via Contact Us or submit your requirement through our Tenders page.
.png)
.png)
.png)
.png)
.png)
.png)
.jpg)
.png)