FPGA XC3S50 Trainer Manufacturer,Supplier and Exporter in India
Product Code : SCL-EELE-13233
Indian Lab Suppliers supplies the FPGA XC3S50 Trainer (Product ID: 13233) as part of its electronics engineering lab equipment range. It is an FPGA/CPLD trainer base board for digital design, supporting plug-in XC3S50 FPGA and XC9572 / XC95108 CPLD modules.
Quick Answer
Device modules are configured through the on-board ISP programmer. Designs are tested on 16 input switches with logic-level LEDs, 16 output LEDs and a 4-digit seven-segment display, with PS/2, RS-232 and VGA interfaces available as options. On-board clocks run at 50 MHz, 10 MHz, 5 MHz, 1 MHz, 100 kHz and 100 Hz, device supply is selectable at 5 V, 3.3 V, 2.5 V, 1.5 V or 1.2 V, and a 26-pin FRC connector takes external interface cards. A manual with 25 sample experiment programs is supplied. Please confirm at quotation which device modules are included and the mains input of the built-in supply.
Key Specifications
| Parameter | Detail |
|---|---|
| Supported modules | XC3S50 FPGA; XC9572 and XC95108 CPLD (optional) |
| Programming | On-board ISP programmer for modules |
| Inputs / outputs | 16 switches with LEDs; 16 output LEDs; 4-digit seven-segment |
| Optional interfaces | PS/2, RS-232, VGA |
| Clock sources | 50 MHz, 10 MHz, 5 MHz, 1 MHz, 100 kHz, 100 Hz |
| Device supply | 5 V, 3.3 V, 2.5 V, 1.5 V, 1.2 V selectable |
| Built-in supply | 5 V / 1.5 A, ±12 V / 250 mA |
| Expansion | 26-pin FRC connector |
| Supplied with | Manual with 25 sample experiment programs |
Where This Is Used
Interface cards include the Interface ADC0809 (Product ID: 13231) and Interface Stepper Motor (Product ID: 13229); the Universal VLSI (FPGA/CPLD) Trainer (Product ID: 13223) adds on-board ADC, DAC and LCD. Browse the full Electronics Engineering Lab Equipment range or related Electronics Lab Equipment products.
Frequently Asked Questions
Is the XC3S50 module included?
Confirm the device modules at quotation.
Can CPLDs be used?
Yes, XC9572 and XC95108 CPLD modules are supported as options.
How are external cards connected?
Through the 26-pin FRC connector.
Related Categories
Electronics Engineering Lab Equipment · Electronics Lab Equipment · Engineering Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on the FPGA XC3S50 Trainer, reach our team via Contact Us or submit your requirement through our Tenders page.
.png)
.png)
.png)
 Trainer_cleanup (1).jpg)