Fibre Optics Modulation/Demodulation Trainer Manufacturer,Supplier and Exporter in India

Fibre Optics Modulation/Demodulation Trainer

Product Code : SCL-EELE-13280

Indian Lab Suppliers supplies the Fibre Optics Modulation/Demodulation Trainer (Product ID: 13280) as part of its electronics engineering lab equipment range. It is a single-board fibre optic trainer for studying fibre characteristics and analog and digital modulation and demodulation.

Quick Answer

Two fibre optic LEDs (660 nm and 950 nm) feed two photodetector receivers through on-board analog and digital drivers and AC amplifiers. An on-board generator gives 1 Hz–10 kHz sine waves with adjustable amplitude and an 8-bit NRZ TTL square wave, and a 4th-order Butterworth low-pass filter with 3.4 kHz cut-off recovers the signal. A voice link with microphone and speaker, an RS-232C PC-to-PC serial link on a 9-pin D connector and four switched faults are included. The 1 m PMMA fibre has polished ends for numerical aperture measurement. Analog bandwidth is 350 kHz; please confirm the digital bandwidth, the modulation schemes covered and the mains rating at quotation.

Key Specifications

ParameterDetail
Transmitters2 fibre optic LEDs, 660 nm and 950 nm
Receivers2 fibre optic photodetectors
Signal sourcesSine 1 Hz–10 kHz (adjustable amplitude); NRZ TTL square, 8-bit
Filter4th-order Butterworth low-pass, 3.4 kHz
Analog bandwidth350 kHz
LinksVoice link (microphone and speaker); RS-232C PC-to-PC, 9-pin D
FibreStep-index multimode PMMA, 1000 micron, 2.2 mm OD, SMA, polished ends; core 1.492, clad 1.406, NA about 0.5; 1 m
Internal supply5 V / 1.5 A, ±12 V / 250 mA
EnclosurePine wood, 230 x 140 x 80 mm (L x W x H), about 3 kg
Connections2 mm banana sockets; manual and patch cords included

Where This Is Used

Used for fibre characteristics and modulation practicals in communication labs. A close variant listing direct AM, FM, PPM and PWM with 1 m and 5 m fibre is the Fibre Optics Trainer (Product ID: 13281). Browse the full Electronics Engineering Lab Equipment range or related Electronics Lab Equipment products.

Frequently Asked Questions

How many optical channels are there?
Two, at 660 nm and 950 nm.

Can two computers be linked?
Yes, through the RS-232C PC-to-PC serial link.

What fibre is included?
1 m of 1000 micron PMMA fibre with polished ends and SMA connectors.

Related Categories

Electronics Engineering Lab Equipment · Electronics Lab Equipment · Physics Lab Equipment

Request a Quote

For pricing, bulk quantities or tender documentation on the Fibre Optics Modulation/Demodulation Trainer, reach our team via Contact Us or submit your requirement through our Tenders page.

   

Office Address

Works: #975 Malleshwaram,
Bengaluru, Karnataka 560003

[email protected]

Follow Us