Fiber Optic Trainer Kit Manufacturer,Supplier and Exporter in India
.jpg)
Product Code : SCL-EELE-13244
Indian Lab Suppliers supplies the Fiber Optic Trainer Kit (Product ID: 13244) as part of its electronics engineering lab equipment range. It is a fibre optic trainer for both glass (single-mode and multimode) and plastic fibre, with a 1310 nm laser, a 660 nm LED and two matching detectors.
Quick Answer
Source 1 is a 1310 nm laser (1 nm spectral width, 1.5 mW, SC receptacle) paired with an InGaAs PIN detector (1250–1600 nm, 0.9 A/W, 1.5 GHz); source 2 is a 660 nm visible LED (25 nm spectral width) in a connector-less package paired with a silicon phototransistor peaking at 850 nm. Either source can be modulated by analog or digital signals. Students plot source and detector characteristics, detector frequency response against load resistance, numerical aperture, propagation and bending loss, fibre bandwidth, analog and digital links and bit error rate. The 1310 nm laser is invisible: never look into it or into a fibre end. Please confirm the power supply and any instruments needed at quotation.
Key Specifications
| Parameter | Detail |
|---|---|
| Source 1 | Laser, 1310 nm, 1 nm spectral width, 1.5 mW, SC receptacle |
| Source 2 | Visible LED, 660 nm, 25 nm spectral width, connector-less |
| Detector 1 | InGaAs PIN, 1250–1600 nm, 0.9 A/W, 1.5 GHz, 14 dB return loss |
| Detector 2 | Silicon phototransistor, 400–1100 nm, peak 850 nm, 0.8 mA per 10 µW at 5 V collector-emitter voltage |
| Glass fibre | Single-mode 9 µm and multimode 62.5 µm core, 125 µm cladding, 1 m each |
| Plastic fibre | Step-index multimode |
| Modulation | Analog and digital, configurable |
Where This Is Used
For WDM work see the WDM Trainer With Chromatic Dispersion (Product ID: 13238); the Fiber Optic Communication Trainer (Product ID: 13241) is a plastic-fibre-only option. Browse the full Electronics Engineering Lab Equipment range or related Electronics Lab Equipment products.
Frequently Asked Questions
Which fibre types can be used?
Plastic multimode and glass single-mode and multimode fibre.
What detector suits the 1310 nm laser?
The InGaAs PIN photodiode (1250–1600 nm).
Can bit error rate be measured?
Yes, it is listed among the experiments.
Related Categories
Electronics Engineering Lab Equipment · Electronics Lab Equipment · Engineering Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on the Fiber Optic Trainer Kit, reach our team via Contact Us or submit your requirement through our Tenders page.
.png)
.jpeg)
.png)
.png)
.png)