Experimental Setup to Study Wavelength Division Multiplexing De-Multiplexing and Building Blocks of an OTDR Manufacturer,Supplier and Exporter in India
.png)
Product Code : SCL-EELE-13247
Indian Lab Suppliers supplies the Experimental Setup to Study Wavelength Division Multiplexing De-Multiplexing and Building Blocks of an OTDR (Product ID: 13247) as part of its electronics engineering lab equipment range. It is an experimental set-up for wavelength division multiplexing at 1310 nm and 1550 nm plus a study of the building blocks of an optical time domain reflectometer (OTDR).
Quick Answer
The set-up pairs a passive component module (couplers, isolators, attenuators, WDM) with a single-mode fibre cable module. Students plot laser I-V and P-I curves (threshold and slope), send analog and digital signals, run full-duplex PC-to-PC communication, and measure attenuator loss, isolator insertion loss and isolation, coupler insertion loss and coupling coefficient, and WDM insertion loss, before multiplexing and demultiplexing analog or digital signals on 1310 nm and 1550 nm. The fibre module is then used to study how an OTDR works: a pulse is launched, and the time and strength of backscattered and reflected light locate splices, connectors and the fibre end. The laser sources emit invisible infrared light: never look into a source, connector or fibre end. Please confirm the modules and instruments included at quotation.
Key Specifications
| Parameter | Detail |
|---|---|
| Wavelengths | 1310 nm and 1550 nm |
| Modules | Fibre optic passive component module; single-mode fibre cable module |
| Passive components | Couplers, isolators, attenuators, WDM |
| OTDR study | Building blocks and construction of an OTDR |
Where This Is Used
Its modules are listed as the Fiber Optic Passive Component Module (Product ID: 13250) and the Single Mode Fiber Optic Cable Module (Product ID: 13251); a complete instrument is the Optical Time Domain Reflectometer (Product ID: 13256). Browse the full Electronics Engineering Lab Equipment range or related Electronics Lab Equipment products.
Frequently Asked Questions
What does an OTDR measure?
Loss and reflection events along a fibre, located by the delay of backscattered light.
Which fibre module is used?
A single-mode fibre cable module.
Is WDM covered as well?
Yes, multiplexing and demultiplexing at 1310 nm and 1550 nm.
Related Categories
Electronics Engineering Lab Equipment · Electronics Lab Equipment · Engineering Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on the Experimental Setup to Study Wavelength Division Multiplexing De-Multiplexing and Building Blocks of an OTDR, reach our team via Contact Us or submit your requirement through our Tenders page.
.png)
.jpg)
.jpg)
.jpg)
.png)