Fiber Optic Passive Component Module Manufacturer,Supplier and Exporter in India
.jpg)
Product Code : SCL-EELE-13250
Indian Lab Suppliers supplies the Fiber Optic Passive Component Module (Product ID: 13250) as part of its electronics engineering lab equipment range. It is a module of single-mode passive fibre optic components (coupler, isolators, attenuator and WDM) for loss, isolation and multiplexing measurements at 1310 nm and 1550 nm.
Quick Answer
The coupler splits light with a stated coupling ratio of 48.90 : 47.60 and insertion losses of 3.23 / 3.46 dB. The isolators pass light one way with about 0.4 dB insertion loss while blocking the reverse direction by 32.80 dB (1310 nm) and 30.37 dB (1550 nm). The attenuator gives 10 dB ±1.0 dB with ±0.6 dB repeatability, and the WDM combines 1310 nm and 1550 nm with 0.03 dB and 0.07 dB insertion loss and 26.32 dB isolation. Used with a 1310/1550 nm source and detector, these parts let students measure each loss figure for themselves.
Key Specifications
| Parameter | Detail |
|---|---|
| Coupler | 1310 / 1550 nm, single-mode, ratio 48.90 : 47.60, ±40 nm, insertion loss 3.23 / 3.46 dB |
| Isolators (1310 / 1550 nm) | Insertion loss 0.44 / 0.40 dB; isolation 32.80 / 30.37 dB; return loss >60/55 dB |
| Attenuator | 1310 / 1550 nm, 10 dB ±1.0 dB, return loss 24 dB or more, repeatability ±0.6 dB |
| WDM | 1310 / 1550 nm, single-mode, insertion loss 0.03 dB (1310) / 0.07 dB (1550), isolation 26.32 dB, ±20 nm |
Where This Is Used
It is used with the Dual Wavelength Fiber Optic Laser Source And Detector Module (Product ID: 13245) in set-ups such as the Experimental Setup to Study Wavelength Division Multiplexing De-Multiplexing (Product ID: 13246). Browse the full Electronics Engineering Lab Equipment range or related Electronics Lab Equipment products.
Frequently Asked Questions
What does an isolator do?
It lets light pass one way and blocks reflected light travelling back.
What is the attenuator value?
10 dB ±1.0 dB.
Which wavelengths does the WDM combine?
1310 nm and 1550 nm.
Related Categories
Electronics Engineering Lab Equipment · Electronics Lab Equipment · Engineering Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on the Fiber Optic Passive Component Module, reach our team via Contact Us or submit your requirement through our Tenders page.
.png)
.png)
 Cutaway Model (1).jpg)
.jpg)
.png)