Experimental Setup to Study Wavelength Division Multiplexing De-Multiplexing - Building Blocks of an OTDR Chromatic Dispersion Manufacturer,Supplier and Exporter in India
.png)
Product Code : SCL-EELE-13249
Indian Lab Suppliers supplies the Experimental Setup to Study Wavelength Division Multiplexing De-Multiplexing - Building Blocks of an OTDR Chromatic Dispersion (Product ID: 13249) as part of its electronics engineering lab equipment range. It is the complete experimental set-up in this series, covering wavelength division multiplexing, the building blocks of an OTDR and chromatic dispersion measurement.
Quick Answer
The set-up brings together a passive component module (couplers, isolators, attenuators, WDM), a single-mode fibre cable module and a chromatic dispersion module. Students plot laser I-V and P-I curves, send analog and digital signals, run full-duplex PC-to-PC communication, measure losses, isolation and coupling coefficients of attenuators, isolators, couplers and the WDM, and multiplex and demultiplex signals at 1310 nm and 1550 nm. The fibre module is used to study how an OTDR locates events from the delay and strength of backscattered light. Chromatic dispersion arises because different wavelengths travel at slightly different speeds in the fibre, so the delay between 1310 nm and 1550 nm pulses over a long fibre gives the dispersion; the chromatic dispersion module includes a fibre for this measurement. The lasers emit invisible infrared light: never look into a source, connector or fibre end. Please confirm the modules and instruments included at quotation.
Key Specifications
| Parameter | Detail |
|---|---|
| Wavelengths | 1310 nm and 1550 nm |
| Modules | Passive component module; single-mode fibre cable module; chromatic dispersion module with fibre |
| Passive components | Couplers, isolators, attenuators, WDM |
| Studies | WDM, OTDR building blocks, chromatic dispersion |
Where This Is Used
Smaller versions are the Experimental Setup to Study Wavelength Division Multiplexing De-Multiplexing and Building Blocks of an OTDR (Product ID: 13247) and the Experimental Setup to Study Wavelength Division Multiplexing De-Multiplexing - Chromatic Dispersion (Product ID: 13248). Browse the full Electronics Engineering Lab Equipment range or related Electronics Lab Equipment products.
Frequently Asked Questions
What does this set-up add over the WDM-only version?
OTDR building blocks and chromatic dispersion measurement.
Which modules are involved?
Passive component, single-mode fibre cable and chromatic dispersion modules.
What wavelengths are used?
1310 nm and 1550 nm.
Related Categories
Electronics Engineering Lab Equipment · Electronics Lab Equipment · Engineering Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on the Experimental Setup to Study Wavelength Division Multiplexing De-Multiplexing - Building Blocks of an OTDR Chromatic Dispersion, reach our team via Contact Us or submit your requirement through our Tenders page.
.jpg)
.png)
.jpg)
.jpg)
.png)
.png)