T, Red., fthd, GI., 2½" x 2" ND, 14 Bar Manufacturer,Supplier and Exporter in India
Product Code : ILS-WD-11227
Indian Lab Suppliers supplies the Tee, Reducing, Female Thread, GI, 2½" x 2" ND, 14 Bar (Product ID: 11227), part of the Water Distribution & Fittings range under Water and Sanitation equipment, used for branching a galvanized iron (GI) water pipe run into a smaller-diameter side outlet.
Quick Answer
The Tee, Reducing, Female Thread, GI, 2½" x 2" ND, 14 Bar is a 90-degree GI tee with a 2½" run and a reduced 2" female-threaded side branch, rated for 14 bar (200 lb/sq inch) pressure, made of malleable cast iron that is hot-dip galvanized and threaded after galvanizing.
Key Specifications
| Parameter | Detail |
|---|---|
| Product ID | 11227 |
| Material | Malleable cast iron, hot-dip galvanized and threaded after galvanizing |
| Nominal diameters | 2½" x 2" |
| Pressure rating | 14 bar (200 lb/sq inch) |
| Thread type | Internal female parallel thread |
| Configuration | 90° tee, reducing on side branch |
This tee fitting carries a 2½" main run with a reduced 2" side outlet, used where a smaller branch line needs to be taken off a larger GI water pipe.
Where This Tee Is Used
The Tee, Reducing, Female Thread, GI, 2½" x 2" ND, 14 Bar is used in galvanized iron water pipe networks to take a reduced-diameter branch off a main run, forming part of a broader GI pipe and fittings range for water distribution systems such as the Cross, Equal, Female Thread, GI, 4" ND, 14 Bar.
Why Buy from Indian Lab Suppliers
Indian Lab Suppliers is an India-based equipment manufacturer and exporter supplying the Tee, Reducing, Female Thread, GI, 2½" x 2" ND, 14 Bar alongside its broader Water and Sanitation catalog, with documentation such as a Certificate of Origin available on request for institutional and export orders.
Frequently Asked Questions
What material is this tee made of?
Malleable cast iron, hot-dip galvanized and threaded after galvanizing.
What are the two diameters?
The main run is 2½" and the side branch is reduced to 2", both female-threaded.
What is the pressure rating?
14 bar, equivalent to 200 lb/sq inch.
When would I use a reducing tee instead of an equal tee?
When the branch line off the main pipe run needs a smaller diameter than the main run itself.
Do you supply this equipment for institutional or export orders outside India?
Yes. Indian Lab Suppliers quotes equipment for institutional and tender buyers across export markets — see the Tenders page for documentation requirements.
Related Categories
Sanitation & Hygiene · Water and Sanitation · Water Testing · Pump Riser Pipe · Water Treatment
Request a Quote
For pricing, bulk quantities or tender documentation on the Tee, Reducing, Female Thread, GI, 2½" x 2" ND, 14 Bar, reach our team via Contact Us or submit your requirement through our Tenders page.
