Single Phase Half Wave and Bridge Controlled Rectifier Manufacturer,Supplier and Exporter in India
Product Code : SCL-EELE-12933
Indian Lab Suppliers supplies the Single Phase Half Wave and Bridge Controlled Rectifier (Product ID: 12933) as part of its electronics engineering lab equipment range. It covers both the single-phase half-wave controlled rectifier and the fully controlled bridge rectifier, with UJT firing and a lamp load.
Quick Answer
Two UJT oscillators, each with a firing-angle potentiometer, fire the SCRs through two 1:1:1 pulse transformers. Students first connect one SCR as a half-wave controlled rectifier, then use all four SCRs as a bridge, and in each case observe how the output waveform and the brightness of the 40 W, 230 V lamp change with firing angle. Power comes through a 50 W, 230 V AC isolation transformer, and the firing circuits use a 9 V DC, 100 mA zener-regulated supply. It uses the same board components as the Single phase fully-controlled Bridge Converter (Product ID: 12892), with the half-wave experiment added. The board runs from 230 V ±10%, 50 Hz mains, and the lamp circuit is at mains voltage.
Key Specifications
| Parameter | Detail |
|---|---|
| Experiments | Half-wave controlled rectifier; bridge controlled rectifier |
| Power devices | 4 SCRs |
| Firing | 2 UJTs; 2 pulse transformers 1:1:1; 2 firing-angle potentiometers |
| Isolation transformer | 230 V AC, 50 W |
| Control supply | 9 V DC, 100 mA, zener regulated |
| Load | Lamp, 40 W, 230 V AC |
| Mains | 230 V ±10%, 50 Hz; ON/OFF switch, fuse and indicator lamp |
| Connections | 4 mm stackable patch cords, 0.5 m |
Where This Is Used
See also the Single phase Half Wave Controlled Converter (Product ID: 12896) for a half-wave-only board. Browse the full Electronics Engineering Lab Equipment range or related Electronics Lab Equipment products.
Frequently Asked Questions
What is the difference between the two circuits?
The half-wave rectifier conducts on one half cycle only; the bridge uses both half cycles.
How is the firing angle changed?
With the two UJT potentiometers.
What load is used?
A 40 W, 230 V lamp.
Related Categories
Electronics Engineering Lab Equipment · Electronics Lab Equipment · Engineering Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on the Single Phase Half Wave and Bridge Controlled Rectifier, reach our team via Contact Us or submit your requirement through our Tenders page.
