Pulse Tools Manufacturer,Supplier and Exporter in India
.png)
Product Code : SCL-SH-12036
Indian Lab Suppliers supplies the Pulse Tools (Product ID: 12036), listed within the Sanitation & Hygiene range under Water and Sanitation equipment. This is a range of pneumatic oil-pulse fastening tools, not itself a sanitation or hygiene item.
Quick Answer
The Pulse Tools are a range of seven oil-pulse pneumatic fastening tools (OUN 881PD, OUN 551PD, OUT 991PD, OUN 441SD, OUN 331SD, OUT 441PD, and OUT 331PD), delivering low-reaction, low-noise, low-vibration torque application from 4Nm up to 90Nm across 3/8-inch and 1/2-inch square drives.
Key Specifications
| Model | Square Drive | Bolt Size | Free Speed | Working Torque | Working Pressure (MPa) | Net Weight | Air Consumption (m³/min) |
|---|---|---|---|---|---|---|---|
| OUN 881PD | 1/2″ | M10-M12 | 4700rpm | 55-80Nm | 0.5-0.6 | 1.6kg | 0.5 |
| OUN 551PD | 3/8″ | M6-M8 | 6300rpm | 20-38Nm | 0.5-0.6 | 0.96kg | 0.4 |
| OUT 991PD | 1/2″ | M10-M12 | 4200rpm | 45-90Nm | 0.5-0.6 | 2.1kg | 0.57 |
| OUN 441SD | 3/8″ | M5-M6 | 5000rpm | 5-14Nm | 0.5-0.6 | 0.88kg | 0.4 |
| OUN 331SD | 3/8″ | M4-M5 | 4200rpm | 4-8Nm | 0.5-0.6 | 0.88kg | 0.35 |
| OUT 441PD | 3/8″ | M5-M6 | 5300rpm | 5-14Nm | 0.5-0.6 | 1kg | 0.4 |
| OUT 331PD | 3/8″ | M4-M5 | 4200rpm | 4-8Nm | 0.5-0.6 | 1kg | 0.35 |
Where These Pulse Tools Are Used
The Pulse Tools suit repeatable, torque-controlled fastening where consistency matters, with the oil-pulse mechanism reducing wear so that mainly the oil, O-ring, spring or washer need periodic replacement, extending service life. They complement other pneumatic workshop tools such as the Ratchet Wrenches and run off the same compressed-air line as the Air Compressor - LD & HD.
Frequently Asked Questions
What is an oil-pulse tool, and how does it differ from an impact wrench?
It uses an oil-pulse unit that delivers torque with low reaction force, low noise and low vibration, giving more consistent and repeatable results than a conventional impact mechanism, with torque monitoring available for performance verification.
How many models are in this range?
Seven: OUN 881PD, OUN 551PD, OUT 991PD, OUN 441SD, OUN 331SD, OUT 441PD and OUT 331PD.
Which model has the highest working torque?
The OUT 991PD, at 45-90Nm.
What maintenance do these tools need?
Low maintenance by design — mainly the oil, O-ring, spring or washer need replacing to extend service life.
Related Categories
Sanitation & Hygiene · Water and Sanitation · Water Testing · Pump Riser Pipe · Water Treatment
Request a Quote
For pricing, bulk quantities or tender documentation on the Pulse Tools, reach our team via Contact Us or submit your requirement through our Tenders page.
.jpg)
.jpg)
.jpg)
.png)
.png)
.jpg)
.jpg)