PID Controller Trainer Manufacturer,Supplier and Exporter in India

PID Controller Trainer

Product Code : SCL-EELE-13320

Indian Lab Suppliers supplies the PID Controller Trainer (Product ID: 13320) as part of its electronics engineering lab equipment range. It lets students apply on/off, P, I, D, PI, PD and PID control to first- and second-order systems in open and closed loop.

Quick Answer

The controller section has a proportional band of 5–55%, integral time of 10–110 ms and derivative time of 1–11 ms, and can be set as P, I, D, PI, PD or PID; a separate on/off controller switches between +12 V and −12 V. Test signals come from a square and triangular wave generator (0–156 Hz) and two variable DC set points (+6 V and +10 V), with an error detector, a dead zone and disturbance generator, and on-board first- and second-order plants. A 3½-digit DVM and test points at each block help with measurements, and 2 mm sockets are used for connections. It runs on 220 V ±10%, 50 Hz (60 Hz on request) and draws about 1.6 VA.

Key Specifications

ParameterDetail
Proportional band5% to 55%
Integral time10 ms to 110 ms
Derivative time1 ms to 11 ms
On/off controllerON +12 V, OFF −12 V
Signal generatorSquare and triangular, 0–156 Hz; variable DC +6 V and +10 V
PlantsFirst-order and second-order systems; dead zone and disturbance generator
Meter3½-digit DVM
Power220 V ±10%, 50 Hz (60 Hz on request), about 1.6 VA

Where This Is Used

Used in control engineering labs to compare controller modes. A version with a dead-time block and 40 Hz test signals is the PID Controller Trainer (Product ID: 13329); for a microprocessor-based controller see the Digital Control System (Product ID: 13321). Browse the full Electronics Engineering Lab Equipment range or related Electronics Lab Equipment products.

Frequently Asked Questions

Which controller modes can be set?
On/off, P, I, D, PI, PD and PID.

What plants are on the board?
First-order and second-order systems.

Can disturbances be added?
Yes, from the dead zone and disturbance generator.

Related Categories

Electronics Engineering Lab Equipment · Electronics Lab Equipment · Engineering Lab Equipment

Request a Quote

For pricing, bulk quantities or tender documentation on the PID Controller Trainer, reach our team via Contact Us or submit your requirement through our Tenders page.

   

Office Address

Works: #975 Malleshwaram,
Bengaluru, Karnataka 560003

[email protected]

Follow Us