PIC Embedded Trainer Kit Manufacturer,Supplier and Exporter in India

PIC Embedded Trainer Kit

Product Code : SCL-EELE-13209

Indian Lab Suppliers supplies the PIC Embedded Trainer Kit (Product ID: 13209) as part of its electronics engineering lab equipment range. It is an embedded trainer built on the PIC18F4550 microcontroller running at 20 MHz, with an on-board breadboard for student circuits.

Quick Answer

The 18F4550 has 32 KB flash, 2048 bytes of SRAM and 256 bytes of EEPROM, with on-chip UART, SPI, I²C, PWM and a 10-bit ADC. The chip sits in a ZIF socket, and 32 I/O lines come out on four 16-pin connectors. Programs are loaded through a 10-pin ISP connector using the USB programmer supplied in a metal enclosure. A small signal generator gives fixed TTL clocks at 10 Hz, 100 Hz, 1 kHz and 10 kHz. The power supply arrangement is not stated; please confirm it at quotation.

Key Specifications

ParameterDetail
MicrocontrollerPIC18F4550, 20 MHz crystal, ZIF socket
On-chip memory32 KB flash, 2048 B SRAM, 256 B EEPROM
On-chip peripheralsUART, SPI, I²C, PWM, 8-channel 10-bit ADC
I/O32 lines on four 16-pin connectors
Programming10-pin ISP connector, USB programmer in metal enclosure
Clock generatorFixed TTL 10 Hz, 100 Hz, 1 kHz, 10 kHz
On-board8 LEDs, 8 switches, 2 bicolour LEDs, 16 × 2 backlit LCD, 4 × 4 matrix keypad, reset key
Breadboard500 tie points

Where This Is Used

The PIC Development Kit (Product ID: 13210) offers the 16F877A / 18F452 alternative with relay outputs. Browse the full Electronics Engineering Lab Equipment range or related Electronics Lab Equipment products.

Frequently Asked Questions

What clock does the microcontroller run at?
20 MHz from a crystal.

Can students build their own circuits?
Yes, on the 500 tie-point breadboard area.

Is a programmer included?
Yes, a USB programmer in a metal enclosure connects to the 10-pin ISP header.

Related Categories

Electronics Engineering Lab Equipment · Electronics Lab Equipment · Engineering Lab Equipment

Request a Quote

For pricing, bulk quantities or tender documentation on the PIC Embedded Trainer Kit, reach our team via Contact Us or submit your requirement through our Tenders page.

   

Office Address

Works: #975 Malleshwaram,
Bengaluru, Karnataka 560003

[email protected]

Follow Us