Patient Monitor ECG_Sp02_BP Patient Monitor Manufacturer,Supplier and Exporter in India
.jpg)
Product Code : SCL-MDE-12410
Indian Lab Suppliers offers the Patient Monitor ECG_Sp02_BP Patient Monitor (Product ID: 12410), a 12-inch multi-parameter patient monitor in our Medical Diagnostic Equipment range under Hospital Lab Equipment.
Quick Answer
This is a 12-inch multi-parameter patient monitor covering five standard parameters — ECG, NIBP, SpO2, PR and HR — built for continuous bedside patient monitoring. The manufacturer-documented technical specification below covers the ECG, arrhythmia (ARR) detection and NIBP (non-invasive blood pressure) measurement ranges in detail.
Key Features
12-inch monitor display · Five standard parameters: ECG, NIBP, SpO2, PR / HR · Selectable 5-lead or 3-lead ECG acquisition with multiple lead-selection combinations · Adjustable ECG gain (±2.5, ±5.0, ±10, ±20 mm/mV, auto) · Configurable HR alarm ranges for Adult and Neo/Ped patients · Built-in ST-segment monitoring · Built-in arrhythmia (ARR) detection with adjustable alarm threshold · Oscillometric NIBP measurement with Manual, Auto and STAT modes, and separate Adult / Pediatric / Neonatal pressure ranges
Key Specifications
| Parameter | Detail |
|---|---|
| Display | 12 inch |
| Parameters Monitored | ECG, NIBP, SpO2, PR / HR |
| ECG Lead Modes | 5-lead (R, L, F, N, C / RA, LA, LL, RL, V) — 2ch waveform; or 3-lead (R, L, F / RA, LA, LL) — 1ch waveform |
| ECG Gain | ±2.5mm/mV, ±5.0mm/mV, ±10mm/mV, ±20mm/mV, Auto |
| HR Range | Adult: 15–300 bpm; Neo/Ped: 15–350 bpm; Accuracy: ±1% or ±1bpm (whichever greater) |
| Input Impedance / Sensitivity | Differential input impedance >5 MΩ; Sensitivity >200 µV P-P |
| CMRR | Monitor mode >105 dB; Operation mode >105 dB; Diagnosis mode >85 dB |
| ECG Bandwidth | Surgery: 1–15 Hz; Monitor: 0.5–35 Hz; Diagnostic: 0.05–100 Hz |
| ST Segment Range | Measure & Alarm: -2.0 to +2.0 mV |
| ARR Detection Accuracy | 70%–100%: ±2%; below 70%: unspecified; update interval ≈1 sec; alarm delay 10 sec |
| NIBP Method / Modes | Oscillometric; Manual, Auto, STAT (STAT measuring period: 5 min) |
| NIBP Pulse Rate Range | 40–240 bpm |
| NIBP Range – Adult | SYS: 40–270 mmHg; DIA: 10–215 mmHg; MEAN: 20–235 mmHg |
| NIBP Range – Pediatric | SYS: 40–200 mmHg; DIA: 10–150 mmHg; MEAN: 20–165 mmHg |
| NIBP Range – Neonatal | SYS: 40–135 mmHg; DIA: 10–100 mmHg; MEAN: 20–110 mmHg |
| NIBP Accuracy | Max mean error ±5mmHg; max standard deviation ±8mmHg (Adult 297±3mmHg, Pediatric 240±3mmHg, Neonatal 147±3mmHg test pressures) |
Note: the source specification lists SpO2 as a standard monitored parameter but does not itemize separate SpO2 accuracy/range figures beyond the shared PR/HR values above — please confirm SpO2 sensor specifications directly before ordering if this is critical to your application.
Where This Is Used
This patient monitor is used at hospital bedsides, ICUs, operation theatres and emergency departments for continuous ECG, NIBP, SpO2, PR and HR monitoring. Browse the full Medical Diagnostic Equipment range or our complete laboratory equipment catalog.
Why Buy from Indian Lab Suppliers
Indian Lab Suppliers is an India-based laboratory and hospital equipment manufacturer and exporter supplying multi-parameter patient monitors and diagnostic instrumentation to hospitals and medical institutions. A Certificate of Origin is available on request for import documentation.
Frequently Asked Questions
What parameters does this patient monitor track?
Five standard parameters: ECG, NIBP (blood pressure), SpO2, pulse rate (PR) and heart rate (HR).
What ECG lead configurations are supported?
Both 5-lead (2-channel waveform) and 3-lead (1-channel waveform) ECG acquisition are supported, with selectable lead combinations and adjustable gain.
How is blood pressure measured?
Non-invasive blood pressure (NIBP) is measured oscillometrically, with Manual, Auto and STAT modes and separate ranges for Adult, Pediatric and Neonatal patients.
Does it detect arrhythmias?
Yes, the monitor includes built-in arrhythmia (ARR) detection with an accuracy of ±2% in the 70%–100% range.
Related Categories
Browse the full Medical Diagnostic Equipment range, or explore our complete laboratory equipment catalog.
Request a Quote
To request pricing or a formal quotation for the Patient Monitor ECG_Sp02_BP Patient Monitor, please contact us or submit your requirement through our lab tender page.
.jpg)