LAN (Local Area Network) Trainer with Protocol Simulator and Analysis Software Hardware Topology Manufacturer,Supplier and Exporter in India
Product Code : SCL-CE-12568
Indian Lab Suppliers supplies the LAN (Local Area Network) Trainer with Protocol Simulator and Analysis Software Hardware Topology (Product ID: 12568), part of the Communication Equipment range under Laboratory equipment, an 8-port switch-based LAN platform combining real Ethernet hardware with protocol-simulation, analysis and network-monitoring software.
Note on naming and scope: this trainer's protocol-simulation software feature set (packet sizes, inter-packet delay, error generation, encryption, CSMA/CD, CSMA/CA, Token Ring, Token Bus, Stop-and-Wait, Go-Back-N, Selective Repeat) is very close to our LAN Trainer (Product ID 12567); please confirm the exact model with our team. This trainer's hardware is an 8-port 10/100Mbps Ethernet switch (IEEE 802.3/802.3x, MDI/MDI-X auto-crossover, up to 200Mbps full duplex); the LAN Trainer instead uses direct 4-node PC-to-PC, star (RJ45) and ring (DB9) hardware connections, so the two differ mainly in their physical topology-building hardware.
Note: we also list a LAN (Local Area Network) Trainer (Product ID 12569), whose own documentation is hands-on hardware and cable fabrication (onboard hub, jumper cabling, crimping kit) with no protocol-simulation software — please confirm the exact model with our team.
Quick Answer
This trainer combines an 8-port Ethernet switch with protocol-simulation and network-analysis software, letting students study star, bus and ring topologies, Ethernet and wireless LAN protocols, and error-handling protocols (Stop-and-Wait, Go-Back-N, Selective Repeat, Token Ring, Token Bus, CSMA/CD, CSMA/CA), while a built-in protocol analyzer and network analyzer report per-packet details, throughput and error rate with real-time graphical representation.
Key Features
Bus, star and ring topology study · socket programming and processing · data encryption and decryption · Ethernet and wireless LAN protocol study · Stop-and-Wait, Go-Back-N, Selective Repeat, Token Bus, Token Ring, CSMA/CA and CSMA/CD protocols · user-selectable packet size from 128 to 16384 bytes · user-selectable inter-packet delay from 1000ms to 5000ms · manual and automatic error generation · real-time graphical representation of transmission and reception · auto-detection of IP addresses and node names · measurement of packet transmission time and throughput · study of bit-error effects on various protocols · built-in protocol analyzer and network analyzer · graph-plotting facility · real-time software can run on an existing LAN · library files provided for project work · built-in help.
Key Specifications
| Parameter | Detail |
|---|---|
| Hardware | 8x 10/100Mbps RJ-45 N-way ports (Ethernet switch) |
| Standards compliance | IEEE 802.3 and IEEE 802.3x |
| Auto crossover | MDI/MDI-X supported |
| Data transfer rate | Up to 200Mbps (full duplex) |
| Topology (software) | Star, Bus, Ring |
| Protocols | Stop and Wait, Go Back N, Selective Repeat, Sliding Window, Token Ring, Token Bus, CSMA/CD, CSMA/CA |
| Packet size | 128, 256, 512, 1024, 2048, 4096, 8192, 16384 bytes |
| Inter-packet delay | 1000, 2000, 3000, 4000, 5000 ms |
| Error generation | Bad packet, acknowledgment lost, auto error generation |
| Network details reported | Computer name, IP address, port number, network status, MAC address, operating system |
| Installation | Plug and play, energy efficient |
Experiments
Study of network topologies; study of Ethernet LAN and wireless LAN; study of data encryption and decryption; implementation and study of Stop-and-Wait, Go-Back-N and Selective Repeat protocols; study of Token Ring and Token Bus protocols; study of the CSMA/CD protocol; measurement of throughput and the effect of bit errors on various protocols; and socket programming.
Where This Is Used
This trainer is used in electronics and communication engineering education for hands-on study of LAN topologies, protocols and network performance analysis using real switch-based Ethernet hardware, complementing our broader Electronics Lab Equipment and Engineering Lab Equipment ranges.
Frequently Asked Questions
How is this different from your LAN Trainer?
The protocol-simulation software is very similar, so please confirm the exact model with our team. This trainer's hardware is an 8-port 10/100Mbps Ethernet switch; our LAN Trainer instead uses direct 4-node PC-to-PC, star (RJ45) and ring (DB9) connections.
Which protocols can be studied?
Stop-and-Wait, Go-Back-N, Selective Repeat, Token Ring, Token Bus, CSMA/CD and CSMA/CA, alongside Ethernet and wireless LAN protocol study.
Can this software run on an existing LAN?
Yes, the real-time software is designed to work on an existing LAN, and library files are provided for project work.
Related Categories
Laboratory · Electronics Lab Equipment · Engineering Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on this LAN Trainer, reach our team via Contact Us or submit your requirement through our Tenders page.
