Industrial Sensors Study Bench Manufacturer,Supplier and Exporter in India
.png)
Product Code : SCL-EELE-11910
Indian Lab Suppliers supplies the Industrial Sensors Study Bench (Product ID: 11910) as part of its electronics engineering lab equipment range. It is a workshop bench for studying and adjusting the main industrial detectors: position switches, inductive, capacitive and photoelectric sensors.
Quick Answer
Sensors and targets mount on a grooved aluminium plate (X travel 600 mm, Y length 460 mm), so sensing distances and angles can be measured. The kit has three limit switches (plunger with elastomer boot, roller lever and one-direction roller plunger, each 1 NO + 1 NC), three M18 inductive sensors with 8 mm range, an M18 capacitive sensor with 5 mm range, photoelectric sensors for 30 m through-beam and 1 m diffuse sensing, a fibre-optic amplifier with 3 m plastic fibre, and a reflector. An accessory case holds two quick-opening vices, a cam with 15°, 30°, 45° and 90° faces, steel, aluminium and brass targets, colour and reflective targets, reflectors and labels. A 24 V DC regulated supply box with indicator lamps for sensor states powers everything through safety sockets. Students cover through-beam, reflex, fibre-optic and background-suppression detection, material-dependent inductive and capacitive sensing, and position detection of linear and angular movement.
Key Specifications
| Parameter | Detail |
|---|---|
| Support | Grooved aluminium plate; X travel 600 mm, Y length 460 mm |
| Limit switches | 3, each 1 NO + 1 NC |
| Inductive sensors | 3 x M18, 8 mm range (incl. NO and PNP) |
| Capacitive sensor | M18, 5 mm range |
| Photoelectric | Through-beam 30 m; diffuse 1 m; reflector |
| Fibre optics | Fibre amplifier, 3 m plastic fibre |
| Targets | Steel, aluminium, brass; colour and reflective; angle cam |
| Power | 24 V DC regulated supply box, state indicators, safety sockets |
Where This Is Used
Used in automation and maintenance courses with Sensors Trainer (Product ID: 10423) and PLC Trainer with HMI (Product ID: 11912). Do not look directly into the photoelectric emitters at close range. Browse the full Electronics Engineering Lab Equipment range or related Engineering Lab Equipment products.
Frequently Asked Questions
Which sensor types are covered?
Limit switches, inductive, capacitive, photoelectric and fibre-optic sensors.
Can detection distance be measured?
Yes, on the grooved plate with X and Y travel.
What powers the sensors?
A 24 V DC regulated supply box.
Related Categories
Electronics Engineering Lab Equipment · Engineering Lab Equipment · Electronics Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on the Industrial Sensors Study Bench, reach our team via Contact Us or submit your requirement through our Tenders page.
.jpg)
.jpeg)
.png)
.jpeg)