Home/Commercial Wiring Installation Trainer Manufacturer,Supplier and Exporter in India
.png)
Product Code : SCL-EELE-12990
Indian Lab Suppliers supplies the Home/Commercial Wiring Installation Trainer (Product ID: 12990) as part of its electronics engineering lab equipment range. It is a table-top wiring trainer that combines lighting, protection and metering panels with a replaceable board for hands-on conduit and batten wiring.
Quick Answer
The top row of the aluminium profile frame holds the lamps (incandescent, CFL, metal halide 70 W, electronic tube, point-source LED and strip LED); the three rows below carry device panels. Protection is by a 2-pole 25 A ELCB with 30 mA trip, and a push button with a selector creates either a high-leakage fault through a 15 W bulb, which trips the ELCB, or a low-leakage fault through a 22 kΩ resistor, which stays below the trip level. A digital single-phase meter reads V, I, W, Wh, VA, VAR and Hz. Other panels hold a 70 W metal halide ballast, a 12 V, 5 A LED driver, one-way and two-way switches, bell, buzzer and neon indicator, a dimmer, fault switches, 3 × 10 A sockets and a display of conduit, elbows, casing, cleats and battens. A 1100 × 300 × 20 mm particle or PVC board slides out like a drawer for students to screw and drill their own wiring layouts.
Key Specifications
| Parameter | Detail |
|---|---|
| Input panel | Single phase 230 V AC; MCBs 4 A and 1.6 A |
| Earth leakage | 2-pole ELCB 25 A, 30 mA; high/low leakage fault simulation |
| Metering | Digital 1-phase meter: V, I, W, Wh, VA, VAR, Hz; 1 A/5 A; 170–250 V |
| Lighting supplies | 2 metal halide ballasts 70 W (230 V, 0.4 A input); SMPS 12 V / 5 A, 60 W for LED |
| Switches and sockets | 2 one-way, 2 two-way, 2 DP switches 32 A; 3 × 3-pin 10 A sockets; bell switch; dimmer |
| Lamps | 3 incandescent, CFL, 70 W metal halide, electronic tube, point LED, strip LED |
| Display panel | Conduit, elbows, casing, taping, cleats, batten with clips, cables |
| Wiring board | Replaceable particle/PVC board, 1100 × 300 × 20 mm |
Where This Is Used
Used in electrician, building-services and polytechnic courses for domestic and commercial wiring. The metal halide ignitor produces pulses of up to about 5 kV and the lamps get hot, so wire with the supply off, and wear eye protection when drilling the board. Related: Home Automation Electrical Wiring Trainer (Product ID: 12944) and Electrical Home Installation Trainer (Product ID: 12945). Browse the full Electronics Engineering Lab Equipment range or related Electricity and Magnetism products.
Frequently Asked Questions
How is earth leakage demonstrated?
A push button and selector create a high-leakage fault (15 W bulb) or a low-leakage fault (22 kΩ resistor).
Can students do real wiring on it?
Yes, on the replaceable 1100 × 300 × 20 mm board with screws and wiring accessories.
Which lamp types are included?
Incandescent, CFL, metal halide, electronic tube, point LED and strip LED.
Related Categories
Electronics Engineering Lab Equipment · Electricity and Magnetism · Engineering Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on the Home/Commercial Wiring Installation Trainer, reach our team via Contact Us or submit your requirement through our Tenders page.
.png)
.jpeg)
.png)
.jpeg)
.png)
.png)