Gas Absorption Column Manufacturer,Supplier and Exporter in India
Product Code : SCL-CLE-13465
Indian Lab Suppliers supplies the Gas Absorption Column (Product ID: 13465) as part of its chemistry lab equipment range. It is a packed column for teaching gas absorption, in which CO2 from an air stream is absorbed into water or sodium hydroxide solution flowing counter-current.
Quick Answer
The column has a 1.4 m working length and 80 mm diameter in two sections, packed with 7 litres of 10 × 10 mm Raschig rings (other sizes can be used), with an electronic pressure sensor across each half. A centrifugal fan supplies up to 160 L/min of air, CO2 is added through manual valves, and the mixture enters at the bottom; an electronically controlled submersible pump sends 1–10 L/min of liquid from a 60-litre tank to the top, in recycle or one-pass mode. CO2 concentration is measured at the column inlet and outlet by a sensor in the console, and flows, temperatures and concentrations appear on the display and in the software. Please confirm the CO2 supply and the computer requirements for the software at quotation.
Key Specifications
| Parameter | Detail |
|---|---|
| Column | 80 mm dia., 1.4 m working length, 2 sections |
| Packing | 10 × 10 mm Raschig rings, 7 L (other sizes possible) |
| Liquid | Submersible pump, 1–10 L/min, 60 L tank, recycle or one-pass |
| Air | Centrifugal fan, up to 160 L/min |
| Pressure drop | 2 electronic sensors, one per column half |
| Gas analysis | Electronic CO2 sensor, inlet and outlet |
| Temperatures | 2 electronic sensors (air and liquid) |
| Display | Alphanumeric console display and software |
Where This Is Used
It is used to measure absorption rates, pressure drop, loading and flooding in a packed column. Compare it with the Absorption In Packed Bed (Product ID: 13441) and the Absorption In Sieve Plate Column (Product ID: 13440). Sodium hydroxide solution is corrosive: wear gloves and eye protection, and secure the CO2 cylinder. Browse the full Chemistry Lab Equipment (general) range or related Engineering Lab Equipment products.
Frequently Asked Questions
What liquid can be used?
Water or a sodium hydroxide solution.
How is CO2 concentration measured?
By an electronic sensor at the column inlet and outlet, shown on the console display.
What packing is supplied?
10 x 10 mm Raschig rings, 7 L in total; other sizes can be used.
Related Categories
Chemistry Lab Equipment (general) · Engineering Lab Equipment · Chemistry Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on the Gas Absorption Column, reach our team via Contact Us or submit your requirement through our Tenders page.
