Fibre Optics Communication Trainer With PC Communication Facility Manufacturer,Supplier and Exporter in India

Product Code : SCL-EELE-13282

Indian Lab Suppliers supplies the Fibre Optics Communication Trainer With PC Communication Facility (Product ID: 13282) as part of its electronics engineering lab equipment range. It is a two-channel fibre optic communication trainer with an RS-232C link for passing data between two PCs over fibre.

Quick Answer

Data from one PC leaves through the 9-pin D RS-232C port, modulates a fibre optic LED and is recovered by a photodetector at the far end. The board has two LEDs (660 nm and 950 nm), two photodetectors, analog and digital drivers, AC amplifiers, a PLL detector, a 3.4 kHz 4th-order Butterworth filter, a 1 Hz–10 kHz sine and TTL square generator, a voice link and four switched faults, and covers direct AM, FM, PPM and PWM. Analog bandwidth is 350 kHz; please confirm the digital bandwidth and mains rating at quotation. This listing has the same specification as the Fibre Optics Trainer (Product ID: 13281).

Key Specifications

ParameterDetail
Transmitters2 fibre optic LEDs, 660 nm and 950 nm
Receivers2 fibre optic photodetectors
PC linkRS-232C serial, 9-pin D
ModulationDirect AM, FM, PPM, PWM; PLL detector
Signal sourcesSine 1 Hz–10 kHz (adjustable amplitude); TTL square
Analog bandwidth350 kHz
FibreStep-index multimode PMMA, 1000 micron, 2.2 mm OD, SMA, polished ends; core 1.492, clad 1.406, NA about 0.5; 1 m and 5 m
Internal supply5 V / 1.5 A, ±12 V / 250 mA
Size230 x 140 x 80 mm (L x W x H); 2 mm banana sockets

Where This Is Used

Used in data communication and networking labs to show serial data transfer over optical fibre. A dual-channel, full-duplex model with 19200 baud RS232 is the Advanced Fiber Optic Trainer-Dual Channel & PC-PC Communication Facility (Product ID: 13269). Browse the full Electronics Engineering Lab Equipment range or related Electronics Lab Equipment products.

Why Buy from Indian Lab Suppliers

Indian Lab Suppliers is an India-based laboratory equipment manufacturer and exporter supplying this fibre optics communication trainer alongside its wider electronics lab equipment range, with documentation such as a Certificate of Origin available on request for institutional and export orders.

Frequently Asked Questions

How are the PCs connected?
Through the RS-232C serial link on 9-pin D connectors.

Which wavelengths are used?
660 nm and 950 nm.

What fibre is supplied?
1000 micron PMMA fibre, 1 m and 5 m, with SMA connectors.

Related Categories

Electronics Engineering Lab Equipment · Electronics Lab Equipment · Physics Lab Equipment

Request a quote: Contact Us or Tenders.

   

Office Address

Works: #975 Malleshwaram,
Bengaluru, Karnataka 560003

[email protected]

Follow Us