Buck Boost Converter Manufacturer,Supplier and Exporter in India
.png)
Product Code : SCL-EELE-12825
Indian Lab Suppliers supplies the Buck Boost Converter (Product ID: 12825) as part of its electronics engineering lab equipment range. It is a trainer for PWM generation and buck-boost DC-DC conversion with different filter components and loads.
Quick Answer
A 24 V / 1 A DC input feeds a MOSFET switch driven through an optically isolated PWM stage and gate driver IC. The PWM frequency can be set from 1 kHz to 20 kHz and the duty cycle from 20% to 60%, so students can see the output move above and below the input. Four inductors, four 63 V electrolytic capacitors (two 1000 µF, two 470 µF) and two 75 Ω load resistors allow different filter and load set-ups, and a single-channel isolation section lets the output be measured safely. The two smallest inductor values are listed in µH, so please confirm the inductor values at quotation.
Key Specifications
| Parameter | Detail |
|---|---|
| Input | 24 V DC, 1 A |
| PWM frequency | 1 kHz to 20 kHz |
| Duty cycle | 20% to 60% |
| Switching device | Power MOSFET with MOSFET/IGBT gate driver IC |
| Loads | RL1 and RL2, 75 Ω each |
| Filter parts | 4 inductors (L3 1.5 mH, L4 354 µH; confirm L1, L2); capacitors 2 × 1000 µF and 2 × 470 µF, 63 V |
| Test points and sockets | 23 test points, 39 banana sockets |
| Power supply | 110 to 260 V AC, 50/60 Hz |
| Size and weight | W 326 × D 252 × H 52 mm, about 1.5 kg |
| Included | 2 mm patch cords (3 × 16 inch, 9 × 8 inch), BNC-to-test-probe, BNC-to-BNC cable, mains cord |
Where This Is Used
Used for switched-mode power supply topics in power electronics labs; compare with the Step-Up Chopper (Product ID: 12823) and the MOSFET, IGBT, Transistor & SCR based Step Down Chopper (Product ID: 12829). Browse the full Electronics Engineering Lab Equipment range or related Electronics Lab Equipment products.
Frequently Asked Questions
What can be studied?
PWM generation and buck-boost converter operation with different filters and loads.
What are the PWM limits?
1 kHz to 20 kHz frequency and 20% to 60% duty cycle.
How is the output measured safely?
Through the built-in single-channel power isolation section.
Related Categories
Electronics Engineering Lab Equipment · Electronics Lab Equipment · Electricity and Magnetism
Request a Quote
For pricing, bulk quantities or tender documentation on the Buck Boost Converter, reach our team via Contact Us or submit your requirement through our Tenders page.
.jpg)
.jpeg)
.jpg)
.png)
.jpeg)