Brake Rigs Manufacturer,Supplier and Exporter in India

Brake Rigs

Product Code : SCL-EELE-13772

Indian Lab Suppliers supplies the Brake Rigs (Product ID: 13772) as part of its electronics engineering lab equipment range. A mobile rig with a working diagonal-split hydraulic brake system, vacuum brake booster and ABS, for diagnosis and brake service training.

Quick Answer

Front and rear disc brakes with calipers are connected in a cross-diagonal circuit, with a working hand brake. With vacuum connected, the booster's force multiplication can be felt at the pedal; the ABS demonstration simulates wheel slip and shows pressure modulation and pedal kickback. Four gauges show the pressure at each wheel. Through the 16-pin OBD socket a scan tool identifies the ABS unit, reads and clears codes and shows live data, and the rig supports routine brake service, including bleeding with the scan tool's ABS bleed mode.

Key Specifications

ParameterDetail
CircuitCross-diagonal hydraulic, front and rear disc brakes with calipers
Hand brakeWorking
AssistVacuum brake booster
ABSWorking ABS modulator with wheel-slip simulation
Gauges4, one per wheel circuit
Diagnosis16-pin OBD: ECU identification, fault codes, live data, bleed mode
Power supply12 V (battery not included)
FrameMobile, 4 casters
Dimensions (H × L × W)1250 × 1000 × 750 mm
WeightApprox. 99 kg

Where This Is Used

The bench version is the Brake Rigs (Bench Version) (Product ID: 13773); the ABS-only board is the Anti-Lock Braking System Bosch Abs 5.3 Training Board (Product ID: 13749). Brake fluid irritates skin and eyes and damages paint: wear gloves and eye protection when bleeding or opening the circuit. Please confirm the vacuum source for the booster at quotation. Browse the full Electronics Engineering Lab Equipment range or related Engineering Lab Equipment products.

Frequently Asked Questions

Why a cross-diagonal circuit?
If one circuit fails, the other still brakes one front and the opposite rear wheel, keeping the car stable.

Can brake bleeding be practised?
Yes, including bleeding the ABS unit through the scan tool.

Is a battery included?
No. It needs a 12 V battery, not included as standard.

Related Categories

Electronics Engineering Lab Equipment · Engineering Lab Equipment · Electronics Lab Equipment

Request a Quote

For pricing, bulk quantities or tender documentation on the Brake Rigs, reach our team via Contact Us or submit your requirement through our Tenders page.

   

Office Address

Works: #975 Malleshwaram,
Bengaluru, Karnataka 560003

[email protected]

Follow Us