Base Band Transmitter Training System Manufacturer,Supplier and Exporter in India
Product Code : SCL-CE-12561
Indian Lab Suppliers supplies the Base Band Transmitter Training System (Product ID: 12561), part of the Communication Equipment range under Laboratory equipment, a VLSI/DSP-based platform that walks students step by step through every major block of a baseband communication transmitter, from data and clock generation through encoding and a wide range of digital carrier modulation techniques.
Note on scope: this system focuses specifically on the transmitter side of baseband communication, with on-board encoding (1-bit through 4-bit and convolutional coding), constellation and eye-pattern viewing, and more than 30 experiments. For a comprehensive platform covering both modulation and demodulation across a similarly wide range of techniques, see our Digital Communication Training System (Product ID 12518); for single-technique standalone trainers, see our ASK, FSK, BPSK, DBPSK Modulator and Demodulator (Product ID 12517) or 16-QAM Training System (Product ID 12514). Please confirm with our team which platform best fits your curriculum requirement.
Note on naming: despite the similar name, our Base Band Transmission/Reception Trainer (Product ID 12582) is a genuinely different, simpler product — a PAM-based baseband link trainer built around noise, PRBS and bit-error-rate testing, not a multi-technique VLSI/DSP modulation platform like this system.
Quick Answer
This training system bridges theory and practice by taking students through every block of a baseband transmitter — data generation, clock generation, encoding and modulation — with over 60 test points, constellation and eye-pattern views, and a real-time software mode that lets experiments run without an external oscilloscope, logic analyzer or data acquisition card.
Key Features
Based on VLSI and DSP design · encoding techniques: 1-bit, 2-bit, 3-bit, 4-bit and Convolutional (1/2, 2/3, 3/4) encoding · modulation techniques: ASK, PSK, DPSK, FSK, QPSK, OQPSK, π/4-QPSK, 8-PSK, 16-PSK and 16-QAM · constellation (vector) pattern display for the respective modulation · eye-pattern view · controllable in Hardware mode or Software mode, without needing an external data acquisition card · more than 60 test points for observation on an oscilloscope or logic analyzer · real-time software lets students control and analyze digital, analog, mixed-signal and XY-mode signals · built-in simulations for the encoding and modulation techniques · software CD included · more than 30 experiments in the manual.
Key Specifications
| Parameter | Detail |
|---|---|
| Sine/cosine generator | On-board digitally synthesized, step-variable: 75Hz, 150Hz, 300Hz, 600Hz, 1.2kHz, 2.4kHz, 4.8kHz, 9.6kHz |
| Clock generator | On-board, step-variable: 75Hz, 150Hz, 300Hz, 600Hz, 1.2kHz, 2.4kHz, 4.8kHz, 9.6kHz |
| Data generator | On-board, step-variable data length (8, 16, 32, 64 bits), 4 data types per length (16 combinations) |
| Encoding techniques | 1, 2, 3, 4-bit; Convolutional 1/2, 2/3, 3/4 |
| Modulation techniques | ASK, PSK, DPSK, FSK, QPSK, OQPSK, π/4-QPSK, 8-PSK, 16-PSK, 16-QAM |
| Test points | 60+ |
| Power supply | 220V ±10%, 50 Hz (60 Hz on request) |
| Power consumption | ~2.5 VA |
| Weight | ~1.5 kg |
| Dimensions | 365 (W) x 260 (D) x 175 (H) mm |
Experiments
Studying each block of a baseband transmitter from data and clock generation through encoding and modulation; comparing the ten supported modulation techniques via constellation and eye-pattern views; comparing convolutional and fixed-length encoding schemes; and operating the system in hardware mode versus real-time software mode without external test instruments.
Where This Is Used
This Base Band Transmitter Training System is used in electronics and communication engineering education for a structured, step-by-step study of baseband transmitter design, complementing our broader Electronics Lab Equipment and Engineering Lab Equipment ranges.
Why Buy from Indian Lab Suppliers
Indian Lab Suppliers is an India-based laboratory equipment manufacturer and exporter supplying this Base Band Transmitter Training System alongside its broader Communication Equipment catalog, with documentation such as a Certificate of Origin available on request for institutional and export orders.
Frequently Asked Questions
Does this system include demodulation, or transmitter side only?
This system focuses on the transmitter side of baseband communication. For a platform covering both modulation and demodulation across a similarly wide technique range, see our Digital Communication Training System.
Can experiments be run without external test equipment?
Yes, the real-time software mode lets students control and analyze digital, analog and mixed signals without an external oscilloscope, logic analyzer or data acquisition card.
How many modulation and encoding techniques does it cover?
Ten modulation techniques (ASK, PSK, DPSK, FSK, QPSK, OQPSK, π/4-QPSK, 8-PSK, 16-PSK, 16-QAM) and multiple encoding schemes (1 to 4-bit and three convolutional rates).
Do you supply this equipment for institutional or export orders outside India?
Yes. Indian Lab Suppliers quotes equipment for institutional and tender buyers across export markets — see the Tenders page for documentation requirements.
Related Categories
Laboratory · Electronics Lab Equipment · Engineering Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on the Base Band Transmitter Training System, reach our team via Contact Us or submit your requirement through our Tenders page.
.jpg)
.jpg)
.jpg)
.png)