Automotive Hydraulic Power Steering System Training Platform Manufacturer,Supplier and Exporter in India
.png)
Product Code : SCL-EELE-13566
Indian Lab Suppliers supplies the Automotive Hydraulic Power Steering System Training Platform (Product ID: 13566) as part of its electronics engineering lab equipment range. It is a running rig built on a real car front axle, showing a hydraulic power steering system together with the front suspension.
Quick Answer
A 1.5 kW three-phase asynchronous motor at 1400 r/min stands in for the engine and drives the steering pump, so students feel hydraulic assist as they turn the wheel and can read system pressure on an oil pressure gauge. The front axle carries the steering gear, fluid lines, struts, control arms and steering knuckles for structure study, working demonstrations and dismantling and refitting practice. The rig runs from a 380 V ±10%, 50 Hz three-phase four- or five-wire supply. The gauge range is listed as “0–100 kg/psi”; please confirm its units at quotation.
Key Specifications
| Parameter | Detail |
|---|---|
| Base | Real automotive front axle with hydraulic power steering and suspension |
| Drive motor | Three-phase asynchronous, 1.5 kW, 1400 r/min, 220/380 V |
| Supply | 380 V ±10%, 50 Hz, three-phase 4- or 5-wire |
| Pressure gauge | 0–100 (units to be confirmed) |
| Frame | Steel tube 60 × 40 × 3 mm |
| Castors | 100 × 50 mm |
| Size (L × W × H) | 1700 × 900 × 1100 mm |
| Working temperature | −40 to +50 °C |
Where This Is Used
It is used for steering geometry, hydraulic assist and suspension lessons, next to the Automotive Electric Control Hydraulic Power Steering System Training Platform (Product ID: 13567) and the Automotive Electric Power Steering System Training Platform (Product ID: 13565). The three-phase supply must be earthed and installed by an electrician; keep hands away from the pump drive and linkages. Browse the full Electronics Engineering Lab Equipment range or related Engineering Lab Equipment products.
Frequently Asked Questions
What drives the steering pump?
A 1.5 kW three-phase motor running at 1400 r/min.
What supply is needed?
380 V ±10%, 50 Hz three-phase.
Can students dismantle it?
Yes, disassembly and installation practice is part of its use.
Related Categories
Electronics Engineering Lab Equipment · Engineering Lab Equipment · Electronics Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on the Automotive Hydraulic Power Steering System Training Platform, reach our team via Contact Us or submit your requirement through our Tenders page.
.jpg)
.jpeg)
.png)
.png)
