ARM-7 Development Board with Programmer Manufacturer,Supplier and Exporter in India
Product Code : SCL-EELE-13138
Indian Lab Suppliers supplies the ARM-7 Development Board with Programmer (Product ID: 13138) as part of its electronics engineering lab equipment range. It is a 32-bit ARM7TDMI development board based on the LPC2294, with on-board peripherals and a flash programmer for embedded-systems practicals.
Quick Answer
The LPC2294 microcontroller runs from a 12 MHz crystal and is programmed over USB or RS-232 using a RUN/ISP mode switch; both links run at 9600 bps. On the board are 8 LEDs, 4 switches, a 4 × 4 matrix keypad, a 16 × 2 alphanumeric LCD, two RS-232 ports on UART0 and UART1, an I2C interface and the internal 10-bit ADC. A JTAG debugger can be connected, and expansion connectors take plug-in modules through 2 mm patch cords and FRC cables. A CD holds sample code, programmer software, documents and course material.
Key Specifications
| Parameter | Detail |
|---|---|
| Microcontroller | LPC2294 (ARM7TDMI, 32-bit), 12 MHz crystal |
| Programming | USB or serial, RUN/ISP switch, 9600 bps |
| On-board I/O | 8 LEDs, 4 switches, 4 × 4 keypad, 16 × 2 LCD |
| Interfaces | 2 × RS-232 (UART0, UART1), I2C, JTAG connector |
| ADC | Internal, 10-bit |
| Test points | 7 |
| Mains supply | 230 V +10%, 50 Hz, about 20 VA |
| Size / weight | 340 (W) × 125 (H) × 210 (D) mm, about 1.3 kg |
| Accessories | RS-232 cable, USB cable, 20-pin FRC cable, 2 patch cords (2 mm, 50 cm), software CD |
Where This Is Used
Experiments cover interfacing of the LEDs, switches, LCD, keypad and ADC, plus transmit and receive programs on UART0 and UART1. For LPC2148-based boards with DAC, PWM and RTOS work see ARM 7 Development Board (Product ID: 13139) and ARM7 Development Platform without ZigBee Module (Product ID: 13140). The unit is mains-powered, so use an earthed socket. Browse the full Electronics Engineering Lab Equipment range or related Electronics Lab Equipment products.
Frequently Asked Questions
Which processor is on the board?
An LPC2294 32-bit ARM7TDMI microcontroller at 12 MHz.
Can it be debugged with JTAG?
Yes, there is an on-board connector for a JTAG debugger.
What resolution is the ADC?
The internal ADC is 10-bit.
Related Categories
Electronics Engineering Lab Equipment · Electronics Lab Equipment · Engineering Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on the ARM-7 Development Board with Programmer, reach our team via Contact Us or submit your requirement through our Tenders page.
.jpg)
.jpeg)
.jpeg)
.png)
.png)