89C51 Embedded Trainer Manufacturer,Supplier and Exporter in India
.png)
Product Code : SCL-EELE-13206
Indian Lab Suppliers supplies the 89C51 Embedded Trainer (Product ID: 13206) as part of its electronics engineering lab equipment range. It is a single-board embedded trainer built on an 8051-family flash microcontroller with ISP programming.
Quick Answer
The specified CPU is the 89C61X2, an 80C51-core microcontroller programmed in-system (ISP), so code can be loaded without removing the chip. Around it sit the usual lab peripherals: 8 output LEDs, 8 input switches, a 16 × 2 LCD, a 4-digit seven-segment display, a 64 KB I²C EEPROM, a DS1307 real-time clock, a PCF8591 ADC/DAC and interfaces for LM35 and DS18B20 temperature sensors. 24 port lines are brought out on a 26-pin FRC connector for external boards. The product name says 89C51 while the specification names the 89C61X2; please confirm the fitted microcontroller at quotation. The unit runs from 230 V AC mains, so it should be used on an earthed socket.
Key Specifications
| Parameter | Detail |
|---|---|
| Microcontroller | 89C61X2 (80C51 core), ISP programming; confirm fitted device |
| Digital I/O | 8 LEDs for output; 8 switches with LED indication for input |
| Displays | 16 × 2 alphanumeric LCD; 4-digit seven-segment display |
| Memory / clock | 24C512 I²C EEPROM (64 KB); DS1307 real-time clock with battery |
| Analog | PCF8591: 4-channel 8-bit ADC and 8-bit DAC |
| Temperature sensors | LM35 and DS18B20 interfaces |
| Expansion | 24 I/O lines on a 26-pin FRC connector |
| Power | 230 V AC input; on-board ±12 V and 5 V supplies |
| Supplied with | User manual with sample programs for all on-board features |
Where This Is Used
The same peripheral board is offered with other processors as the LPC2148 ARM Embedded Trainer (Product ID: 13207) and the ATMEGA32 AVR Embedded Trainer (Product ID: 13208); the Piggy Back Module for 89C51/89C61X2 (Product ID: 13213) swaps the controller. Browse the full Electronics Engineering Lab Equipment range or related Electronics Lab Equipment products.
Frequently Asked Questions
Does the chip need to be removed for programming?
No. It is programmed in-system (ISP).
What can be connected externally?
24 I/O lines are available on a 26-pin FRC connector.
Which temperature sensors are supported?
LM35 (analog) and DS18B20 (1-wire digital) interfaces are provided.
Related Categories
Electronics Engineering Lab Equipment · Electronics Lab Equipment · Engineering Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on the 89C51 Embedded Trainer, reach our team via Contact Us or submit your requirement through our Tenders page.
.jpeg)
.jpg)
.jpg)
.jpg)
.png)
.jpg)